诚一信统一售后平台诚一信统一售后平台 · 技术文档
English
账户
退出
English
账户
退出
  • Manuals

    • 3D Printer Installation Process
    • Daily Usage Instructions
    • Machine Overview
    • Pre-Operation Inspection & Preparation
  • Quick Fix

    • Card reader doesn't beep or light up on software startup, software error
    • Debris on the resin tank is hard to clean
    • Does the machine need frequent shutdowns?
    • How long can material stay in the resin tank?
    • How long does the resin tank last?
    • Membrane damage
    • Membrane loose due to long-term use without maintenance
    • No light from projector
    • Oxygen generator parameter check
    • What tools to use for filtering?
    • When to turn the oxygen generator on or off?
    • Z-axis stuck
    • All parts have regular thick fault layers
    • Blurry and swollen printed parts
    • Cracks after washing
    • Dimensional issues for some parts
    • Dimensions suddenly incorrect for a normally printed part
    • Distortion at the bottom of thin, large-area parts
    • Entire plate dropped
    • Flash/debris on part surface
    • How to choose a cleaning agent?
    • Inconsistent quality across the same batch
    • Layer shift at the top
    • Layer shift on specific parts
    • Layer shifts across the entire plate
    • Layer shifts/parts pulled off for solid or large-area objects
    • Nothing printed
    • Part "burnt" after curing
    • Parts overlapping/sticking to build platform
    • Pitting/casting defects
    • Porosity in/on parts
    • Resin in tank feels viscous
    • Slight layer lines on part
    • Some parts dropped
    • Tail-like trailing at support base (no effect on print quality)
    • Thick lines on part
    • Visible lines on part
    • Abnormal estimated time after importing SLC
    • "card in time" popup
    • Card reading errors (find card failure)
    • "importing data error" or "err" popup
    • When running the file or opening the software, errors such as "load the key of card failure," "find card failure," and "check card error NT= (a string of numbers)" pop up
    • "Motion Command Error" popup
    • Power-off recovery prompt (Yes/No)
    • Printing shows the desktop instead of slices
    • Program unresponsive after importing SLC file
    • Slicer Default Layer Height Settings
    • Software crashes during printing
    • Software expiration prompt (Not Activated)
    • "Z axis above 0" popup
  • Tutorials

    • instructional-video
    • New-Printing-Software-Walkthrough
    • Oxygen-Permeable-Film-Replacement-Guide-for-4K120
    • Printing-Software-Walkthrough
    • Zero-Position-Calibration-Video
    • Holiday Maintenance Guide

Card reading errors (find card failure)

Card reader interference. Close software, flip the card, and restart. If it fails repeatedly, replace the resin card.

Prev
"card in time" popup
Next
"importing data error" or "err" popup