Quick Fix
- Card reader doesn't beep or light up on software startup, software error
- Debris on the resin tank is hard to clean
- Does the machine need frequent shutdowns?
- How long can material stay in the resin tank?
- How long does the resin tank last?
- Membrane damage
- Membrane loose due to long-term use without maintenance
- No light from projector
- Oxygen generator parameter check
- What tools to use for filtering?
- When to turn the oxygen generator on or off?
- Z-axis stuck
- All parts have regular thick fault layers
- Blurry and swollen printed parts
- Cracks after washing
- Dimensional issues for some parts
- Dimensions suddenly incorrect for a normally printed part
- Distortion at the bottom of thin, large-area parts
- Entire plate dropped
- Flash/debris on part surface
- How to choose a cleaning agent?
- Inconsistent quality across the same batch
- Layer shift at the top
- Layer shift on specific parts
- Layer shifts across the entire plate
- Layer shifts/parts pulled off for solid or large-area objects
- Nothing printed
- Part "burnt" after curing
- Parts overlapping/sticking to build platform
- Pitting/casting defects
- Porosity in/on parts
- Resin in tank feels viscous
- Slight layer lines on part
- Some parts dropped
- Tail-like trailing at support base (no effect on print quality)
- Thick lines on part
- Visible lines on part
- Abnormal estimated time after importing SLC
- "card in time" popup
- Card reading errors (find card failure)
- "importing data error" or "err" popup
- When running the file or opening the software, errors such as "load the key of card failure," "find card failure," and "check card error NT= (a string of numbers)" pop up
- "Motion Command Error" popup
- Power-off recovery prompt (Yes/No)
- Printing shows the desktop instead of slices
- Program unresponsive after importing SLC file
- Slicer Default Layer Height Settings
- Software crashes during printing
- Software expiration prompt (Not Activated)
- "Z axis above 0" popup